Kayayyakin mu

Ana amfani da masu haɗa tasha don haɗa madubin famfo zuwa na'urorin wuta (transformer, Breaker, Disconnet switch. da dai sauransu) ko zuwa bangon bango na tashar tashar.Masu haɗin haɗin sun haɗa da nau'in maɗaukaki da ƙwanƙwasa, duka nau'ikan biyu suna da kusurwar O°, 30° da 90° tare da jagorancin jagoran famfo.

DTL jerin AICu tashar tashar haɗin kai ya dace da haɗin gwiwar miƙa mulki na na'urar rarraba Aluminum core na USB da kayan lantarki.Ana amfani da DL Aluminum don haɗin tashar aluminum na Aluminum core cable da lantarki kayan aiki.DT jan karfe m da ake amfani da jan karfe m lantarki kayan aiki.DT jan m da ake amfani da jan karfe m hade da jan karfe core na USB da lantarki kayan aiki, The kayayyakin rungumi gogayya waldi aiki. , Our kamfanin kayayyaki Cu-AI m da waya matsa sanya fashewar biki dabara.The kayayyakin da fasali a matsayin high waldi ƙarfi, m lantarki dukiya, juriya ga galvanic lalata, dogon sabis rayuwa, taba karaya, high aminci, da dai sauransu.

Babi na 3- Matakan shigarwa Na Bimetallic Lug

1. Bude kunshin, duba ko samfurin samfurin ya dace da na'urorin jan karfe da aluminum da aka sanya, sa'an nan kuma shigar bayan tabbatar da zaɓin daidai;

2. Matakan shigarwa:

(1) kwasfa da rufin rufin a wurin haɗin gwiwar mai sarrafa aluminum, kuma tsayin tsiri ya fi girman zurfin rami mai tasiri na ƙirar tashar da ta dace, wanda shine kusan 1 ~ 2mm;

(2).Yi ƙoƙarin kauce wa ɓarna madugu lokacin da za a cire Layer insulation Layer;

(3) danna sashin cirewar waya ta aluminium a cikin tushen rami na ciki na tashar tare da hanyar da aka makale;

(4) a cikin haɗin gwiwar matsawa, gefen kafawar matsi na ƙuntatawa ko tsakiyar layin raƙuman ruwa zai kasance a kan jirgin sama ɗaya ko madaidaiciyar layi bi da bi.

(5) ga kowane mutu yana dannawa, mutun ya tsaya tsawon 10 ~ 15s bayan an rufe shi a wurin, don haka karfen da ke wurin matsin mutu zai lalace.

Don cimma daidaito na asali, don kawar da matsa lamba;

(6) Hanyar aiki da al'amuran da ke buƙatar kulawar matsa lamba ya kamata a danna bisa ga jagorar masana'anta;

(7) bayan dannawa, ingancin bayyanar haɗin gwiwa zai cika waɗannan buƙatun:

A. bayan matsa lamba, matsa lamba ya kamata ya zama santsi ba tare da fasa ko burrs ba, kuma duk gefuna ba su da tukwici;

B. Bayan da aka danna ramin, zurfin ƙaddamarwa zai kasance daidai da tsayin daɗaɗɗen sashi saboda mutuwar namiji, kuma ramin ramin ya kasance mai laushi kuma ba mai lalacewa ba;

(8) bayan dannawa, haɗa ido na tashar tashar tare da kayan lantarki da ƙarfi tare da kusoshi.